The tool is designed for pressing-out of front axle steering knuckle of BelAZ mine dump-trucks with 30-240 tons loading capacity.
Device is mounted on the front axle with a jib crane or a forklift.
BelAZ front axle steering knuckle press-out tool
BelAZ front axle steering knuckle press-out tool
The tool is designed for pressing-out of front axle steering knuckle of BelAZ mine dump-trucks with 30-240 tons loading capacity.
Device is mounted on the front axle with a jib crane or a forklift.
The tool is designed for pressing-out of front central and rear central joint
pins in the front suspension of BelAZ mine dump-trucks with
carrying capacity from 30 to 340 tons.
Dump-truck suspension front and rear central joint pin demounting tool
Dump-truck suspension front and rear central joint pin demounting tool
The tool is designed for pressing-out of front central and rear central joint
pins in the front suspension of BelAZ mine dump-trucks with
carrying capacity from 30 to 340 tons.
The tool is meant for dismantling front wheel hub from the
suspension strut in Terex TR100 mine dumper without demounting of undercarriage assembly.
The tool utilizes a built-in hydraulic cylinder with 150 tons of force which guarantees successful hub demounting.
Manual hydraulic drive allows to independently perform
demounting procedure either in repair facility or on-the-site.
Manual hydraulic drive allows to perform demounting
procedures distantly, ensuring high level of personnel safety.
Terex TR100 mine dump-truck front wheel hub demounting tool
Terex TR100 mine dump-truck front wheel hub demounting tool
The tool is meant for dismantling front wheel hub from the
suspension strut in Terex TR100 mine dumper without demounting of undercarriage assembly.
The tool utilizes a built-in hydraulic cylinder with 150 tons of force which guarantees successful hub demounting.
Manual hydraulic drive allows to independently perform
demounting procedure either in repair facility or on-the-site.
Manual hydraulic drive allows to perform demounting
procedures distantly, ensuring high level of personnel safety.
The tool is designed for demounting wheel hubs in BelAZ mine
dump-trucks. The tool is attached to the hub with bolts or nuts.
Utilizes hydraulic drive.
Mine dump-truck wheel hub demounting hydraulic tool
Mine dump-truck wheel hub demounting hydraulic tool
The tool is designed for demounting wheel hubs in BelAZ mine
dump-trucks. The tool is attached to the hub with bolts or nuts.
Utilizes hydraulic drive.
The tool is designed for bead breaking of large OTR tires.
The tool is suitable for all OTR tires mounted on five-part
rims with bore diameter from 21 to 51 inches. Can be used
in mine dump-trucks with 30-136 tons capacity made by
BelAZ, Caterpillar, Komatsu, Volvo, Bell, John Deere, Doosan.
The tool is especially usable with tubeless tires (23.5-25;
29.5-25; 35/65-33).
Bead breaker
Bead breaker
The tool is designed for bead breaking of large OTR tires.
The tool is suitable for all OTR tires mounted on five-part
rims with bore diameter from 21 to 51 inches. Can be used
in mine dump-trucks with 30-136 tons capacity made by
BelAZ, Caterpillar, Komatsu, Volvo, Bell, John Deere, Doosan.
The tool is especially usable with tubeless tires (23.5-25;
29.5-25; 35/65-33).
This tool is meant for removing wheel clamping wedges
in BelAZ mine dumpers. Required pulling force is created
by a built-in hydraulic cylinder which is driven by a
manual hydraulic pump.
Wheel clamping wedge
removal tool
Wheel clamping wedge removal tool
This tool is meant for removing wheel clamping wedges
in BelAZ mine dumpers. Required pulling force is created
by a built-in hydraulic cylinder which is driven by a
manual hydraulic pump.
Place an order for equipment
Please type your contacts
Comments
We will contact you shortly